Fetal Growth Percentile Calculator
Place a sonographic estimated fetal weight on the Hadlock 1991 population reference by exact gestational weeks and days. The result shows the estimated percentile and the 3rd, 10th, 50th, 90th, and 97th reference weights rather than hiding the comparison curve.
Enter the ultrasound record
Hadlock 1991 percentile result
This weight is above the 10th percentile on the selected Hadlock reference. A percentile does not prove normal placental function or predict an individual outcome; review the complete ultrasound and trend with the obstetric team.
What a fetal weight percentile means
A percentile ranks an estimated fetal weight against a reference distribution at the same gestational age. An estimated 38th percentile means the entered weight is greater than about 38% and less than about 62% of weights represented by the mathematical reference at that age. It does not mean the fetus is 38% developed, has a 38% chance of a condition, or will have the same birthweight percentile.
This calculator uses the 1991 Hadlock in-utero sonographic weight standard. The Society for Maternal-Fetal Medicine recommends a population-based fetal growth reference such as Hadlock for determining fetal weight percentiles, and that document was reaffirmed in 2024. NICHD also offers a separate U.S. calculator built from its Fetal Growth Study, including race/ethnicity-specific models. Results from different standards should not be mixed into one trend.
Estimated fetal weight is itself calculated by ultrasound software from biometric measurements such as head circumference, abdominal circumference, biparietal diameter, and femur length. This calculator does not reproduce that first estimation step. It assumes the EFW has already been reported and performs the second step: placement on a gestational-age weight reference.
Hadlock mean and percentile method
The Hadlock reference reports a standard deviation of approximately 12.7% of the predicted mean. This module calculates SD as mean × 0.127, calculates z = (entered EFW − mean) ÷ SD, and converts that z-score through the standard normal cumulative distribution.
The 3rd, 10th, 90th, and 97th weights use standard-normal z-values of approximately −1.881, −1.282, +1.282, and +1.881. The 50th displayed value is the modeled mean. Results are rounded to the nearest gram and percentile while calculations retain decimals.
The supported range is 10 weeks 0 days through 40 weeks 0 days, matching the documented reference range. The equation can return a number outside that interval, but extrapolation would not be the published standard. Gestational days are converted to a fractional week by dividing by seven.
Worked example: 30 weeks and 1,500 grams
- Use established dating. The pregnancy is 30 weeks 0 days based on the obstetric record, not a size-equivalent age from the current scan.
- Calculate the mean. Substituting 30 into the Hadlock curve produces about 1,559 grams.
- Calculate spread. Twelve point seven percent of 1,559 is about 198 grams for one reference SD.
- Place the EFW. Fifteen hundred minus 1,559 equals −59 grams, or z approximately −0.30.
- Convert to percentile. The standard normal cumulative probability is about 38%, displayed as the 38th percentile.
At 30 weeks, the modeled 10th-percentile weight is approximately 1,306 grams and the 90th approximately 1,813 grams. The entered EFW lies between them. The difference from the modeled mean is only one part of interpretation; measurement uncertainty can easily be larger than 59 grams.
Dating must be independent of current size
Percentile calculation requires an age axis that was assigned using obstetric dating principles, often the last menstrual period confirmed or revised by early ultrasound. If a third-trimester fetus is small and the current biometric size is used to make the pregnancy “younger,” the percentile can be falsely normalized. That circular reasoning hides the growth question.
Enter completed weeks plus additional days from the report. Thirty weeks 6 days is not the same as 30.6 decimal weeks; it equals 30 + 6/7, approximately 30.857. The calculator performs that conversion.
If the due date or gestational age is uncertain, the obstetric team must resolve dating before a public percentile result can be trusted. Do not change a due date from this calculation.
U.S. clinical thresholds need full context
Below the 10th
SMFM defines fetal growth restriction as sonographic EFW or abdominal circumference below the 10th percentile. “Small” and “pathologically growth restricted” are not automatically identical.
Below the 3rd
Often described as severe FGR in guidance and may change surveillance or delivery considerations. This calculator does not issue those decisions.
Above the 90th
A higher percentile can prompt review for large-for-gestational-age context, diabetes, anatomy, and delivery planning, but EFW error remains important.
Umbilical artery Doppler, amniotic fluid, interval growth, anatomy, fetal testing, maternal conditions, and gestational age influence management. A one-time percentile does not establish trajectory. Two scans too close together can make apparent growth dominated by measurement error.
Why the ultrasound estimate can move across a cutoff
EFW is derived from several measurements, each affected by image plane, caliper placement, fetal position, operator, equipment, and formula. Clinical discussions often use an error range around the estimate rather than treating every gram as observed fact. A fetus reported near the 10th or 90th percentile may cross that boundary with modest measurement variation.
Chart choice also matters. Hadlock, NICHD, WHO, INTERGROWTH-21st, and customized standards represent different populations and statistical models. A 2023 U.S. comparison found materially different proportions classified as small or large across standards. Keep the same validated standard when interpreting serial change unless the care team intentionally changes it.
The percentile shown here is a calculation under one model, not a guarantee about birthweight, health, or timing. Concern should be discussed with the obstetric clinician or maternal-fetal medicine specialist rather than resolved by repeated internet calculations.
Input and result checklist
| Field or output | Correct use | Common mistake |
|---|---|---|
| Gestational age | Established obstetric age on scan date. | Using the current ultrasound’s size-equivalent age. |
| EFW | Sonographic estimated fetal weight from the report. | Entering maternal weight, birthweight, or fundal-height estimate. |
| Pregnancy type | Singleton only for this reference implementation. | Applying singleton percentiles to twins. |
| Percentile | Position within Hadlock’s modeled distribution. | Treating it as diagnostic certainty or probability of disease. |
| Benchmark weights | Reference weights at exactly the entered age. | Comparing values from a different week or chart. |
Safety and scope
This calculator is for reviewing a professional ultrasound report in a singleton pregnancy. It cannot measure a fetus, assess fetal movement, interpret Doppler, or evaluate contractions, bleeding, fluid leakage, pain, severe headache, vision change, high blood pressure, or another pregnancy concern.
Contact the obstetric care team promptly for decreased fetal movement or another instructed warning sign, and seek emergency care when directed. Do not delay assessment because an old EFW was above the 10th percentile. Growth and well-being can change after a scan.
Only the treating team can diagnose FGR, decide surveillance, evaluate causes, or recommend delivery timing. This educational result should be saved with the scan date, formula/chart name, EFW method, gestational age, and complete report.
Frequently asked questions
Is the 38th percentile normal?
It lies between the 10th and 90th Hadlock reference weights, but “normal” requires the complete pregnancy and ultrasound context. A percentile cannot assess anatomy, placenta, fluid, or Doppler.
Does below the 10th always mean FGR?
U.S. guidance uses EFW or AC below the 10th in the definition, but clinicians distinguish constitutionally small fetuses from pathologic restriction using the full evaluation and trend.
Can I use this for twins?
No. Twin and higher-order multiple growth patterns differ. Use the reference and surveillance plan selected by the maternal-fetal care team.
Why does my ultrasound machine show another percentile?
It may use a different EFW formula, growth standard, gestational age, rounding method, or software version. Compare chart names and inputs before assuming one is wrong.
Can percentile predict birth weight?
No. It ranks the current estimate. Later growth, timing of delivery, measurement error, and pregnancy conditions affect birthweight.
Should the due date change if size is ahead or behind?
Not from this calculation. Later size differences are the outcome being assessed. Obstetric dating changes follow professional criteria, usually relying most strongly on early information.
Related planning context
For a separate U.S. It does not determine pregnancy benefits, medical deductions, or clinical care.
References
- Hadlock et al.: In utero analysis of fetal growth—a sonographic weight standard
- SMFM Consult Series #52: Diagnosis and management of fetal growth restriction
- ACOG: Indications for Outpatient Antenatal Fetal Surveillance
- NICHD Fetal Growth Calculator
- LOINC 33162-9: Hadlock 1991 fetal body-weight reference equation
Educational use only. Obstetric references, software, and management guidance change; verify the complete report with the treating team.